Xerox Phaser 8500 Error Codes
Transfix Drive Slow and Transfix Drive Fast Typical Value R# Definition... Your browser doesn't support TLS 1.2 protocol. Page 145 Phaser 8400/8500/8550/8560 Color Printer Service Manual Deskew Shaft (Continued) Typical Value R# Definition (8400) CW On fe settling 0.010 to time (sec). 0.20 CW On average fe. -610 to Page 132: Introduction, Hidden Service Menu Introduction Hidden Service Menu This chapter covers the general start-up, Power On Self Test (POST), and power supply operations of the printer to aid in http://uciforum.org/xerox-phaser/xerox-phaser-8500-error.html
Since the motor speeds up if it senses the drum drive system slowing down, fingers caught in the drum belts and gears can be severely injured. Unfortunately I'm not allowed to tell youhow to get into service mode, but a quick Google search should pull that information up for you just fine. What doI donow? Page 152 4-22 Tray 2, Tray 3, and Tray 4 Pick Shaft (Continued) Typical Value (8400) R# Definition Plate lifted average Test picks paper from selected tray (test currently supports picking
Xerox Phaser 8560 Error Codes List
The Printhead, mounted to the X- Axis shaft, moves laterally across the surface of the drum. Optional 525-Sheet Feeder Tray 4 2. Process Motor Typical Value R# Definition (8400) Motor fe ripple 2.8 to 6.0 (ticks) Motor fe average -4 to 3.0 (ticks) Motor drive voltage 5 to 11 ripple (volts) Motor drive So secure pages of this site will not work.
Below are a few things you can check if you're handy with working on stuff. Page 61 Theory of Operation Release Blade Strip Solenoid Exit Sensor Transfix Roller Preheat Sensor Strip Sensor Paper Preheater s8500-027 Phaser 8400/8500/8550/8560 Color Printer Service Manual 2-29... It gets to 16% and then reboots itself after displaying an error code. Check the Purge Pump wiring.
NOTE It is possible that the power supply is not shorted, but instead is out of spec and can lead to an error condition. Xerox Phaser 8560 Error Code 07 010 Tray 3 pick flag triggered unexpectedly while picking from Tray 3. Page 46: Purge System Theory of Operation Purge System Proper Printhead operation is dependant on the correct operation of the purge system. Page 95 Phaser 8400/8500/8550/8560 Color Printer Service Manual Troubleshooting Procedure for 13,008 to 13,010 Error Code (Drum Heater) Step Questions and Actions Check that the ambient room temperature is within specifications
iteminc 7,392 views 4:15 Xerox Colorqube 8570 & 8580 Remanufactured Ink Blocks - Duration: 9:41. Run the appropriate diagnostic test: 37,002.47 = Left Jetstack Heater... These mounts can break. Page 87 Phaser 8400/8500/8550/8560 Color Printer Service Manual 7,010.43: The Printhead is stuck in the tilted position, or is not able to tilt forward to the print position, due to problems.
Xerox Phaser 8560 Error Code 07 010
Page 36: Process Drive Process Drive A small DC servomotor powers the Process Drive gearbox to rotate the gears to specific positions during the printing process. Sign in to report inappropriate content. Xerox Phaser 8560 Error Codes List Page 35 Theory of Operation The Ink Loader: Stores and melts the ink. Ensure ground integrity for the printer (see “Ensuring Ground Integrity” on page 4-65).
The strip flag actuated unexpectedly when paper picked from Tray 3. http://uciforum.org/xerox-phaser/xerox-phaser-error-codes-8560.html Sign in Share More Report Need to report the video? The process motor stalled during operation. Hope everyone has a great day!
Power supply +15 volt under limit. Page 19: General Information General Information In this chapter... ■ Printer Introduction and Overview ■ Printer Configurations ■ Control Panel Configuration ■ Parts of the Printer ■ Routine Maintenance Items and Page 28: Printer Specifications, Physical Dimensions And Clearances Printer Specifications Physical Dimensions and Clearances 1-10 Print Engine Only Value Width: 422 mm (16.6 in.) Depth: 514 mm (20.24 in.) Height: 368 this content Channels formed by the stacked plates route ink past the 1236 individual, piezo-electric crystal-driven diaphragms, which force the ink in droplets out the 1236 corresponding nozzles.
Page 51: Electronics Module Electronics Module Main Board Configuration Card Phaser 8400/8500/8550/8560 Color Printer Service Manual The Electronics Module includes the main board, the power control board, and the power supply. Page 115 Phaser 8400/8500/8550/8560 Color Printer Service Manual 8400 PEST Description Power supply -50 volt under limit. 37,056.47: 37,057.48: Power supply +15 volt over limit. Page 38: Ink Loader Theory of Operation Ink Loader The Ink Loader consists of four parallel channels with an ink melting element at the end of each channel.
It gets to 16% and then reboots itself after displaying Printer Error Press 08,007.41:7852 Message 6 of 7 (13,471 Views) Reply 0 Kudos LaBete New Member Posts: 3 Registered: 08-31-2013 Re:
The Printhead includes 1236 interleaved jets (309 of each primary color) to provide the ability to electronically turn off a weak or missing jet to restore image quality. Page 177 Phaser 8400/8500/8550/8560 Color Printer Service Manual This test scans the thermocouples and reports data on the current temperature with the goal of providing a picture of the current tempera The ink is sold in a nifty 3 pack, which is all Iwould recommend placing inside the inkloader. Loading...
You will notice a gear pack. Page 33: Theory Of Operation Theory of Operation In this chapter... ■ Main Printer Subsystems ■ Print Process ■ Printer Self-Maintenance ■ Configuration Card Personality Parameters Chapter... Putting in cracked or broken ink sticks is a no-no. http://uciforum.org/xerox-phaser/xerox-phaser-8560-error-codes-04.html Phaser 8560 Printer Configurations Phaser Features...